| Quantity: | |
|---|---|
NT500
LEANTALL
8477101090
When stepping onto the production floor, the quiet hum and rhythmic precision of this 500-ton injection molding system immediately convey a sense of industrial reliability. Designed specifically for the rigorous demands of producing food containers, plastic cutlery, and thin-walled packaging, this heavy-duty machinery transforms raw polymer into flawless finished goods with remarkable consistency. The tactile feel of the heavy cast-iron platens and the smooth, frictionless glide of the hydraulic cylinders reflect a commitment to uncompromising build quality. By integrating European-standard injection speeds with a highly responsive dual-cylinder system, operators experience a noticeable reduction in cycle times, directly translating to increased daily output. The machine operates with a reassuring stability, minimizing vibrations even under maximum clamping force, which drastically reduces mold wear and ensures every plastic spoon or container meets strict dimensional tolerances. For facility managers aiming to scale production without sacrificing part quality, this equipment serves as the robust heartbeat of a modern manufacturing line, turning ambitious production targets into achievable daily metrics.
General Information | |
|---|---|
Model | NT500 |
Delivery Time | 50-75 Days |
Package Standard | Bare packing for main machine, wooden case for auxiliary equipment |
Injection Unit | |
Screw Diameter (mm) | 70 / 75 / 80 |
Screw L/D Ratio | 21.4 / 20 / 19 |
Shot Volume (Theoretical) (cm³) | 1501 / 1723 / 1960 |
Injection Weight (PS) (g) | 1366 / 1568 / 1784 |
Injection Pressure (Mpa) | 194 / 169 / 148 |
Injection Rate (cm³/sec) | 396 / 455 / 517 |
Plasticization Capacity (PS) (g/sec) | 63 / 78 / 93 |
Injection Stroke (mm) | 390 |
Injection Speed (mm/sec) | 103 |
Screw Speed (rpm) | 160 |
Clamping Unit | |
Clamp Force (Kn) | 5000 |
Open Stroke (mm) | 800 |
Space Between Tie Bars (mm × mm) | 830 X 780 |
Max. Mould Height (mm) | 850 |
Min. Mould Height (mm) | 280 |
Ejector Stroke (mm) | 200 |
Ejector Force (Kn) | 111 |
Ejector Number (N) | 13 |
Others | |
Max. Pump Pressure (Mpa) | 16 |
Pump Motor Power (Kw) | 50 |
Heating Power (Kw) | 29.5 |
Machine Dimension (L*W*H) (m) | 7.9 1.95 2.4 |
Machine Weight (Estimate) (T) | 16 |
Achieving a competitive edge in plastics manufacturing requires equipment that consistently outpaces standard industry norms. This 500-ton system is meticulously crafted to deliver exceptional results, ensuring every production run is highly profitable and free from unexpected interruptions.
Unmatched Volumetric Precision: The advanced injection mechanism ensures that every single shot is delivered with exact accuracy, virtually eliminating flash, short shots, and material waste in intricate food container molds.
Superior Thermal Management: Standardized heating bands wrap the robust barrel, providing rapid, uniform heat distribution that melts resins smoothly while actively extending the lifespan of the heating elements.
Versatile Tooling Accommodation: The generously sized platen features multiple mounting options, accommodating a vast array of mold configurations with minimal setup time required from your technicians.
Automated Maintenance Routines: A centralized lubrication system continuously protects critical moving joints, drastically reducing manual maintenance requirements and preventing costly, unexpected downtime.
High rigidity template structure design Stable operation and fast speed
• Optimized designed double-toggle five-joint clamping machinism High rigidity mould platen with enlarged space between tie bar, fit for larger scope of the moulds.
• The template has both T-slots and regular threaded holes for easy installation of various molds.
• Large moving die stroke with smooth & fast motion.
• Electrical & mechanical safety protection device.
• Four-stage control for pressure, speed, position to lock & open the platen.
• Automatic centralized lubrication system.
• Differential quick mode lock device.
• Gear regulating the mould driven by hydraulic motor.
Powerful Performance Low Energy Consumption
• Optimizing design can improve rigidity and steady.
• Double cylinder injection system is used to ensure stability, quick response and high precision.
• According to the European standard, the injection speed can be faster, and get a wider processing range.
• A PLD temperature control, precise temperature control of barrel.
• Ceramic heater is the standard outfit, can increase the speed of heating, and prolong service life.
Technical Parameter | |||||
Part | Name | Unit | NT500 | ||
Injection unit | SCREW DIAMETER | mm | 70 | 75 | 80 |
SCREW L/D RATIO | L/D | 21.4 | 20 | 19 | |
SHOT VOLUME(THEORETICAL) | CM3 | 1501 | 1723 | 1960 | |
INJECTION WEIGHT(PS) | g | 1366 | 1568 | 1784 | |
INJECTION PRESSURE | Mpa | 194 | 169 | 148 | |
INJECTION RATE | cm⊃3;/sec | 396 | 455 | 517 | |
PLASTICZATION CAPACITY(PS) | g/sec | 63 | 78 | 93 | |
INJECTION STROKE | mm | 390 | |||
INJECTION SPEED | Mm/sec | 103 | |||
SCREW SPEED | rpm | 160 | |||
Clamping unit | CLAMP FORCE | Kn | 5000 | ||
OPEN STROKE | mm | 800 | |||
SPACE BETWEEN TIE BARS | mm×mm | 830X780 | |||
MAX.MOULD HEIGHT | mm | 850 | |||
MIN.MOULD HEIGHT | mm | 280 | |||
EJECTOR STROKE | mm | 200 | |||
EJECTOR FORCE | Kn | 111 | |||
EJECTOR NUMBER | N | 13 | |||
Others | MAX.PUMP PRESSURE | Mpa | 16 | ||
PUMP MOTOR POWER | Kw | 50 | |||
HEATING POWER | Kw | 29.5 | |||
MACHINE DIMENSION(L*W*H) | m×m×m | 7.9*1.95*2.4 | |||
MACHINE WEIGHT(ESTIMATE) | T | 16 | |||
1. Q: What is the product range?
A: Focus on the manufacture and development of plastic injection molding machines and its auxiliary equipment such as cooling tower, chiller, etc.
2. Q: Where is your main selling market?
A: We have business domestic, USA, Russia, Indonesia, Egypt, Turkey, Uzbekistan, Pakistan, etc.
3. Q: Will you offer field installation and operator training at the buyer's factory?
A: Yes, we will arrange our skilled engineers for filed installation and training.
4. Q: What is the delivery time(equipment production time)?
A: It will be ready around 50-75 days after getting mutual confirmation about the order details and prepayment.
5. Q: Do you also have source for molds and spare parts?
A: Yes, we can offer with the competitive quality and reasonable price. Customized as required.
6. Q: What is the standard of package?
A: Wooden case packing for the auxiliary equipment, bare packing for the plastic injection molding machine. Full container shipment is highly suggest.
